HK450

To help see my heli I use the following items

1. Outrage Programmable Flybar Paddles (Neon Orange)
2. KB Tail Rotor Blades (Neon Orange) 
3. Align 500 Landings Skids (Neon Orange) 
               a) Align Skid Pipes (needed to complete the landing gear) 
               b) Align Skid Nuts (needed to complete the landing gear) 
                                 Note: You will also need 4x bolts and nuts to mount the neon skid to the main frame lower plate, the holes are only a couple of millimeters out but can still screw through and 4x Grub Screws for the skids to hold the pipes in position.

The 500 Skid setup will give you 15mm more clearance from the ground and about 50mm wider skids and 60mm longer, thats only 25mm each side and 30mm front and back, but the main advantage is the 15mm height as you can land on grass without the fear of clipping your tail and snapping the belt.

It is like having training gear again but with a really good look, actually you cant notice it when they are on.

I have also tried the standard 500 gear (not the widened type) and they are really nice to clear grass, they are around 15mm more narrow than the wide version and are almost 10mm taller than the neon version, if I could find neon orange in those I would definately buy them.

Regards

Elias Gourvelos (EatAtJoes)

Here are some images

500_00.jpg

◄ Back

Next ►

Picture 1 of 7

450 standards, 500 wide, 500 standard, side by side comparison side view